Sheet metal cut clean — ready to form and weld.
12kW fiber laser cutting on a 6′×13′ bed — carbon to 1″, stainless to ¾″, aluminum to ½″. Parts come off square, dross-free, and ready for the next operation.
IMWX cuts sheet metal on a 12kW fiber laser with a 6-by-13-foot bed — carbon steel up to 1 inch, stainless to 3/4 inch, and aluminum to 1/2 inch — all in Flomaton, Alabama. The high beam power cuts thicker plate faster and leaves a clean, low-heat edge with none of the dross a plasma cut leaves behind, so parts move straight to forming, welding or finishing. From a single prototype blank to a full production run, nesting is optimized for yield and every part comes off dimensionally identical. Sheet blanks here become enclosures, brackets, panels and the CDU and rack bodies our data-center customers order.
What we fabricate
- Enclosures & cabinetsSheet
- Brackets, gussets & base platesSheet
- Panels, covers & blanking panelsSheet
- Chassis & framesSheet
- Perforated & vented panelsSheet
- Mounting plates & rail kitsSheet
Representative shop and parts photography from our Alabama facility.
What runs on our floor.
- Machine
- 12kW fiber sheet laser
- Bed size
- 6′ × 13′ (72″ × 156″)
- Carbon steel
- Up to 1″
- Stainless steel
- Up to ¾″
- Aluminum
- Up to ½″
- Materials
- Carbon, stainless, aluminum (galvanized, copper/brass on request)
- Edge quality
- Laser-clean, low HAZ, no plasma dross
- Run size
- One-off through production
Built for the build schedule.
12kW power cuts thicker plate faster and cleaner than lower-power lasers or plasma.
Dross-free edges move straight to forming, welding or finishing — no secondary cleanup.
Optimized nesting for yield, with every part dimensionally identical across the run.
More of what we run.
Questions, answered.
Carbon steel up to 1″, stainless up to ¾″, and aluminum up to ½″ on our 12kW fiber laser.
Need parts cut?
Send a STEP or DXF — a real fabricator replies within one business day.